When to use LAN Cable to Send Files from One Computer to Another?
This method is most useful when we have to share large files between two computers.
It would be very tiring to keep on inserting and removing the pen drive again and again. when LAN cable comes into the picture , you have to connect it once and then leave it and when you come back you data would be transfer .No need to stand there and waste your time by looking at it.Using a wired connection the speed is also impressive, generally better than pen drive.
Things That You Required
·
Two laptop (mandatory)
·
A lan cable (obviously)
·
Little bit of your time and patience (only if it’s your first
time)
Difficulty Level: Moderate
Step 1
Connect one computer
to another using LAN cable.
Step 2
Now you have to enable sharing option .
Go to Control Panel> Network and Internet>
Network and Sharing Center > change Advanced sharing settings.
Enable
sharing option
Make sure you turn on network detection and turn
off password protection off.
Step 3
Bring both the computers on same network.
1. Open control panel
Control Panel >> Network and Internet >>Network Connections
2. You will
see Local Area Connection 2 .
3. Right click it and navigates to properties .
4. You will see tcp/ ivp4 option there and select it’s properties.
3. Right click it and navigates to properties .
4. You will see tcp/ ivp4 option there and select it’s properties.
Put
the following value on 1st computer
Ip address 192.168.1.1
Subnet mask 225.225.225.0
Default gateway 192.168.1.3
Subnet mask 225.225.225.0
Default gateway 192.168.1.3
Put the following value on 2nd computer
Ip address 192.168.1.3
Subnet mask 225.225.225.0
Default gateway 192.168.1.1
Subnet mask 225.225.225.0
Default gateway 192.168.1.1
2nd
laptop ip address
Basically what we are doing is keeping the
subnet mask same and changing the ip address .If everything went good you will
see the two computer name in the Networks.
Two
computer connected under same network using lan
Step 4
Share
a folder on LAN
Assuming that you have
connected the cable properly and enable the sharing option now it’s time Send
files from one computer to another , this is very simple
1.Select the folder you want to share , right click it .
2.Select share this >> specific people.
1.Select the folder you want to share , right click it .
2.Select share this >> specific people.
3. On the drop
down menu select everyone >> add >> click share.
Enjoy sharing...









0 comments:
Post a Comment